Trade waste grease arrestors and grease reduction devices approved by Power and Water Corporation in the Northern Territory as of August 20204.
Before purchasing or installation commences, please contact Power and Water’s Trade Waste Department to ensure that a Trade Waste Application Form has been completed and plumbing plans for installation have been stamped ‘approved’ by Power and Water. Once an application has been received, Power and Water will contact you to discuss the correct and most suitable pre-treatment equipment for your business.
Any businesses unable to install an in-ground grease trap must provide a report by a hydraulic consultant confirming that a minimum 1000 litre grease trap cannot be installed. Power and Water must approve, in writing, the installation of a grease reduction device before installation is carried out. Only products listed in the table below are permitted in the Northern Territory.
Any pump systems related to above ground grease traps will require written pre-approval by Power and Water and Environmental Health before installation.
Installation of a grease trap or grease reduction device can only be carried out by a Northern Territory licensed plumber in accordance with Australian Standard 3500. The location of these devices must ensure they are always readily accessible and sample points supplied on the outlet to sewer in all cases. It is the applicant’s responsibility to contact Plumbing Building Advisory Services on 8999 8985 where required.
Please note: Pre-treatment equipment installed in the Northern Territory that does not meet these standards and guidelines, may require removal at the cost of the installer.
Print fact sheet - Approval of grease arrestors and grease reduction device
Grease traps
| Product name | Manufacturer's contact details | Supplier's items | Special conditions |
|---|---|---|---|
| All Cast – precast concrete grease arrestor | All Cast NT Address: 1041 Makagon Rd, Berrimah NT Phone: (08) 8947 1154 | Minimum 1000 litres + | |
| Darwin Precast – precast concrete grease arrestor | Darwin Precast Products Address: 8 Hardy Rd, Pinelands NT Phone: (08) 8932 1446 | Minimum 1000 litres + | |
| Halgan – polypropylene modular grease arrestor | Halgan Pty Ltd Address: 10 Davis Rd, Wetherill Park NSW Phone: (02) 9939 8030 Email: info@halgan.com.au | MGT 1000L – 5000L | |
| Mascot Engineering - lightweight glass reinforced concrete grease arrestors | Darwin and Alice Springs Mascot Engineering | QGA Series 1000L-3000L | |
| CV Plastics | CV Plastics Address: 15 Deborah street, Phone: (03) 5442 8728 Email: sales@cvplastics.com.au | Minimum 1000 litres + | |
| Everhard Industries | Everhard Industries Phone: 07 36376444 Email: info@everhard.com.au | Minimum 1000 Litres + | |
| ACO Grease Arrestors | ACO Polycrete Pty Ltd Address: 467 Tufnell Road, Banyo QLD 4014 E-mail: acoqld@acoaus.com.au Phone 07 3292 4500 | Lipumax Basic
Eco Jet Basic
| |
| Port Capital | Port Capital Pty Ltd Phone: 0412 715740 | PCGT-1000 - PCGT 5000 |
|
| Coerco | Coerco Address: 9 Huggett Drive, Dalwallinu WA Phone: (08) 9661 0610 Email: info@coerco.com.au | Coerco (GA-2000) | Power and Water must be informed of intended use of this product prior to installation. |
Grease reduction devices
| Product name | Manufacturer's contact details | Supplier's item | Special conditions |
|---|---|---|---|
| Grease guardian | Tap & Drain Doctor NT Address: 113 Coonawarra road, Winnellie NT Contact: Richard McElwee Phone: (08) 8947 2343 | D1 – D5 | Only for use upstream of an authorised in ground grease arrestor.
|
| Grease shield | Arafura Catering Equipment Address: Shop 5 Parap place, Parap NT Phone: 08 8981 6655 | Only for use upstream of an authorised in ground grease arrestor. | |
| Grease muncher arrestors | Global Water Group Phone: 08 8275 8000 | Grease Muncher Model GM700 | A Grease Muncher unit is only for use under specific conditions and must be approved by Power and Water prior to installation. |
Read more information on Managing liquid waste in the retail food industry.
Contact us:
Email: tradewastedept.pwc@powerwater.com.au
Phone: 1800 245 092 - Trade Waste via our Customer Services Centre
